Product details
| Features | Advantages and Applications |
|
|
|
|
|
|
|
|
Specification parameters
| Features | Condition | Data | Unit |
| Geometric Characteristics | |||
| Core Diameter | -- | 50±2.5 | [μm] |
| Core roundness | -- | ≤5.0 | [%] |
| cladding diameter | -- | 125.0±1.0 | [μm] |
| cladding non-circularity | -- | ≤0.6 | [%] |
| Coating diameter | -- | 245±7 | [μm] |
| Concentricity of coating/cladding | -- | ≤10.0 | [μm] |
| Coating non roundness | -- | ≤6.0 | [%] |
| Core/cladding concentricity | -- | ≤1.0 | [μm] |
| fiber length | -- | Up to 17.6 | [km/disk] |
| Optical properties | |||
| attenuation | 850nm | ≤2.4 | [dB/km] |
| 910nm | ≤2.0 | [dB/km] | |
| 1300nm | ≤0.6 | [dB/km] | |
| ofl | 850nm | ≥3500 | [MHz·km] |
| 1300nm | ≥500 | [MHz·km] | |
| Effective mode bandwidth | 850nm~870nm | ≥4700 | [MHz·km] |
| 910nm | ≥3100 | [MHz·km] | |
| Link length | 800GBase-SR8 | one hundred | [m] |
| 800GBase-SR4.2 | 100 | [m] | |
| Numerical Aperture | -- | 0.200±0.015 | -- |
| Group refractive index | 850nm | 1.482 | -- |
| 1300nm | 1.477 | -- | |
| Zero-dispersion wavelength | -- | 1295~1340 | [nm] |
| Zero-dispersion slope | 1295nm≤λ0≤1310nm | ≤0.105 | [ps/(nm2·km)] |
| 1310nm≤λ0≤1340nm | ≤0.000375(1590-λ0) | [ps/(nm2·km)] | |
| Macro bending loss ¹ | -- | -- | -- |
| 2 circles, radius 15mm | 850nm | ≤0.1 | [dB] |
| 1300nm | ≤0.3 | [dB] | |
| Backscatter Characteristics 1300nm | |||
| Steps (average value measured in both directions) | -- | ≤0.10 | [dB] |
| Irregularities in the length direction and point discontinuities | -- | ≤0.10 | [dB] |
| Uneven attenuation | -- | ≤0.08 | [dB/km] |
| Environmental characteristics 850nm and 1300nm | |||
| Temperature additional attenuation | -60 ℃ to 85 ℃ | ≤0.10 | [dB/km] |
| Temperature humidity cycle with additional attenuation | -10 ℃ to 85 ℃, 4% to 98% relative humidity | ≤0.10 | [dB/km] |
| Immersion additional attenuation | 23℃, 30 天 | ≤0.10 | [dB/km] |
| Dry heat additional attenuation | 85 ℃, 30 days | ≤0.10 | [dB/km] |
| Damp heat additional attenuation | 85 ℃ and 85% relative humidity, 30 days | ≤0.10 | [dB/km] |
| Mechanical Characteristics | |||
| Filter tension | -- | ≥9.0 | [N] |
| -- | ≥1.0 | [%] | |
| -- | ≥100 | [kpsi] | |
| Coating peeling force | Typical average peel strength | 1.5 | [N] |
| peak force | ≥1.3，≤8.9 | [N] | |
| Dynamic fatigue parameters (nd, typical values) | -- | twenty | -- |
Note: 1. The injection conditions for the macro bending loss test must meet the IEC 61280-4-1 standard;
Copyright: Aoxing Optical Commnication Equipment Co., Ltd
粤ICP备2022122194号
